Boat fender HTM-series
Price range: 689.00 kr through 1999.00 kr
- rotationally molded
- High gloss, durable material
- Very large protective surface: 94-96%
- Manufactured in Kent, USA
Stripped , sleek boat fender in the HTM-series – A boat fender without top part!
Invest in a modern boat fender from the HTM-series. This boat fender has a sleek, stripped design where the fender line runs through the fender body. This fender has no top part or other added design which takes up extra space on board. This Polyform fender has a unique, pressure safe air valve and is made of durable, high gloss material.
In Europe, boat fenders from Polyform US are deemed best in class when it comes to quality and durability. Customer complaints have rarely been heard of.
Don’t pump too much air into your fenders!
Then there is the risk that your fender covers will not fit. Inflate enough air so that the fender is still soft when you press it. This is to allow the fender to mould itself to the edge of the dock or other places that the fender hits, providing better protection. Keep in mind that fenders expand when it’s warm outside, so don’t inflate your fenders in the winter when it’s cold.
Another tip is to deflate the fender, then thread the fender sock and then re-inflate the fender!
Fenders
* The length is measured between the tops
| Model | Length cm | Diameter cm | Suitable for boats |
| NF3 | 48,3 | 14,2 | 10-17 ft. |
| NF4 | 54,9 | 16,3 | 18-25 ft. |
| NF5 | 68,1 | 22,6 | 26-40 ft. |
| HTM2 | 52,1 | 21,6 | 25-30 ft. |
| HTM3 | 68,6 | 26,7 | 31-40 ft. |
| HTM4 | 88,4 | 34,3 | 41-50 ft. |
| F1 | 61,0 | 15,2 | 20-25 ft. |
| F02 | 66,0 | 19,1 | 26-30 ft. |
| F3 | 76,2 | 20,8 | 31-40 ft. |
| F4 | 102,9 | 21,6 | 31-40 ft. |
| F5 | 76,2 | 27,9 | 41-50 ft. |
| F6 | 106,7 | 27,9 | 41-50 ft. |
| F7 | 104,1 | 38,1 | 51-55 ft. |
| F8 | 147,3 | 38,1 | 56-65 ft. |
| F11 | 146,1 | 53,8 | 66-75 ft. |
| F13 | 194,3 | 73,7 | Over 75 ft. |
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Colour |
Black ,Grey ,Navy Blue ,White |
| Model |
HTM-2 ,HTM-3 ,HTM-4 |
| Brand |
Polyform US |
Polyform US
Från Polyform US tillhandahåller vi högkvalitativa fendrar och bojar för allehanda användningsområden.
Med en fender eller boj från Polyform US kan du känna dig trygg med att kvalitén är en av marknadens absolut bästa. Fendrarna och bojarna går att få i flertalet färger och har en mycket hög lyster. All tillverkning sker i Kent, USA
You may also like…
Fender Cover FenderFits dual-pack
